Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN bus. It is discreet, does not use LED indicators or key fobs, and is concealed in the vehicle's wiring.
It also permits the user to turn off the system temporarily by using Transport Mode in the event of renting their vehicle. This guide will walk you through the process of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a modern security device that guards your vehicle from hacking, key cloning and relay attacks. The system is linked directly to the ECU of your vehicle and protected by a pin code that you choose. It's undetectable to thieves using diagnostic scanners or other advanced methods, and is unable to be disabled by circuit cuts.
The system is simple to use, but it's essential to use a an expert installation to ensure a secure and secure connection to your vehicle's ECU. Installers who are approved by Thatcham can assist you with the installation and programming of your Ghost system. They can also suggest a tracking device or alarm system to complete your vehicle's protection package.
The first step is to disconnect your battery in order to avoid accidental airbag deployment or short circuits. After that the installer is now able to begin work. Basic hand tools are useful for securing connections with precision and a multimeter may be used to test electrical values and safety. Insulation tape and cable tie are crucial to ensure connections are secure and keep wiring neat. The Ghost Immobiliser user manual will give specific instructions that are specific to your particular model.
It is crucial to select an area for grounding that is free of dirt or paint during installation. The installer should be sure that the immobiliser's CAN H and CAN L wires are connected to the appropriate ports on your vehicle's ECU. These wires can be plugged into or soldered, depending on the model. A high-quality connector is recommended to ensure a sturdy and secure connection.
Transport Mode can be turned on by the customer once the installation is completed. This allows the vehicle to be used by valet parking or mechanics without needing to know the pin code. To do this, the user must press the service button on the dashboard five times in a matter of 2 seconds. The system will confirm this by displaying 5 indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It's a great choice for anyone who frequently rents their vehicle on platforms such as Turo. An immobiliser can reduce insurance costs, since it lowers the chance of theft.
Getting Started
You can't go far wrong using an autowatch immobiliser for those who want to safeguard your vehicle from theft. It protects your vehicle from being started even if a criminal steals or copies the key. autowatch ghost immobiliser to its advanced technology, which prevents the engine from starting until the right PIN code has been entered.
The device connects to the CAN bus network in your vehicle, allowing it to communicate with the ECU directly. It uses the buttons on your dashboard and steering to create a unique sequence which only you know. This makes it impossible for anyone else to start your car. This is the ultimate system to protect your pride and joy. It will ensure that your car's value remains intact should you ever decide to sell it.
Installing a Ghost immobiliser is easy, but you must follow the steps to avoid electrical problems and system malfunctions. You must first locate a power supply of 12V and a solid grounding on the car's chassis. After that, you can begin connecting the wires for the immobiliser. Make sure you use top-quality connectors and soldering techniques to ensure a secure connection. Connect the connections with heat shrink tubing or insulation tape, as well as other materials to prevent electrical short circuits.
After the wires have been connected, you can reconnect the battery and start the engine to test the immobiliser's functionality. After you've verified that everything is functioning properly and you are satisfied, you can place the immobiliser in a secure position inside the vehicle. Make sure you hide it well to prevent any thief from taking advantage of it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified, which means that it is in compliance with the highest standards of security and is a great protection against car thieves. It is a superior defense against key cloning, hacking, and relay attacks, and it isn't able to be disabled unless you know the code. The device is simple to use, and it can be set up to an option for a service valet so that your vehicle will not be activated if you bring it for an MOT or servicing.
Wiring
auto ghost immobiliser is a cutting-edge security system specifically designed to deter theft of vehicles. It connects directly to the vehicle's CAN bus and communicates with the ECU and ECU, making it a virtually undetectable addition to your car. The Ghost Immobiliser will not interfere with the factory settings of your car unlike other aftermarket systems which require the removal of circuit elements.
It's also totally undetectable by thieves using diagnostic scanning devices. The system doesn't send or receive radio frequency signals and instead uses CAN data to communication with your ECU. Additionally, it doesn't require any modification to your car's existing key fobs.
Enter your disarm sequence (either two or one buttons) and then switch on the ignition of your car to activate the Ghost Immobiliser. The indicator will flash twice to confirm that you've entered the correct code. After that, you are able to start your vehicle and drive off with peace of mind.
Once installed, Ghost Immobiliser guards your vehicle from key cloning or hacking while preserving its value. If you ever need to surrender your car to valet parking or for service The Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete a Ghost Immobiliser installation, you'll need locate a source of constant power (12V) and a grounding point. Make sure that both are well-insulated and able to be touched. Cable ties are also suggested for bundling and securing the wires. This reduces the risk of theft by thieves. Be sure to verify the position of these points to avoid mistakes and mark them with a piece of tape or label. Examine all connections for signs that they are wearing out. Loose connections can lead to malfunctions in the system, so make certain that they are securely in place and securely insulated. Make sure to test your Ghost Immobiliser after installation has been completed. This will ensure that the unit functions properly and that all connections and insulation are secure. Be sure to fix any issues immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that integrates seamlessly with your car's ECU to prevent unauthorised motor starting. Its cutting-edge technology safeguards your vehicle from hacking, key cloning, and other common tactics that thieves employ to steal cars. The Ghost is a perfect complement to existing tracking and alarm systems to offer the ultimate security for your vehicle. This system's unmatched features and subtle design make it a popular option for car enthusiasts and security-conscious drivers too.
It is essential to follow the procedures for installation to ensure a correct integration of the Ghost Immobiliser. Check the wiring diagram of the vehicle as it will assist you in locating and connecting the wires. After that, you'll need identify the power source as well as grounding points. Once you have located them, you'll need to mark the points so that they are easy to identify when installing. Finally, it's essential to use high-quality tools and materials. Basic hand tools can assist with making precise connections while a multimeter can check electrical values and ensure safety. Insulation tape and cable ties will help keep all connections tidy and neat. Additionally, a user's manual will give specific guidelines tailored to your Ghost model.
It is important to test the system prior to installing it. Enter the PIN code into the system and start the vehicle. This test will verify that the immobiliser works as intended and will stop vehicle starts that are not authorized. This step should be done regularly as part of your routine inspections of your vehicle to ensure the system is working properly.
After the installation has been completed, you can start driving your vehicle with confidence. autowatch ghost immobiliser will guard your pride and joy from thieves who might steal your car. It will ensure that no one will take your car away without having the correct PIN code. The Ghost can also be paired with a tracker that is approved by Thatcham to detect any attempt to tamper with or steal your vehicle and allow you to track your vehicle if it is stolen.
The Ghost is compatible with a variety of automobiles, including those from the majority of major manufacturers. If you're interested in securing your car using this advanced device, call Monty's Locksmith today to learn more about our installation and service options. We are a TASSA registered installer, which ensures that we adhere to strict standards for installing our products. This reassures customers, insurers and law enforcement agencies that installations are done safely and in a correct manner.