Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN bus. It is discreet It does not include LED indicators or key fobs, and is hidden in the wiring of your vehicle.
The user can also disable the system temporarily by using Transport Mode when renting out their vehicle. This guide will take you through the process of installing a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle from key cloning, hacking and relay attacks. The system is connected directly to the ECU of your vehicle and secured by a PIN code that you choose. It is inaccessible to thieves using diagnostic scanners and other modern methods. It is not able to be disabled with circuit cuts.
The system is simple to use, however it is essential to have a professional installation to ensure a clean and secure connection to your vehicle's ECU. A Thatcham-approved installer can help in the installation and programming of your Ghost system. They can also suggest a tracking device or alarm to complete your vehicle's protection package.
First, the installer needs to disconnect your battery to prevent the possibility of airbag deployment and short circuits. Once the battery is disconnected, the installer may safely begin working. Hand tools are the most basic to be used for precise connections. A multimeter is a great tool to test electrical values. Insulation tape and cable tie are vital to secure connections and keep wiring tidy. The Ghost Immobiliser user's guide will give specific instructions that are specific to your particular model.
It is crucial to select a grounding location that is free of paint or debris during installation. The installer must be sure that the immobiliser's CAN H as well as CAN L wires are connected to the correct ports on the vehicle's ECU. Based on the model, these wires might require soldering or plugged in. A high-quality connector is recommended to ensure a long-lasting and secure connection.
After the installation is completed, the customer can activate after the installation is complete, the customer can activate Transport Mode. This allows the vehicle to be used by valet parking attendants or mechanics without having to know the pin code. The user must press the icon for service on the dashboard five times in 2 seconds. Once this is done the system will confirm with 5 indication signals.
The Autowatch Ghost 2 immobiliser is TASSA approved and a highly efficient immobiliser. It's a great choice for those who rent their vehicles often through platforms like Turo. An immobiliser can lower insurance costs, as it reduces the likelihood of theft.
Getting Started
autowatch ghost 2 immobiliser won't have a problem with an autowatch immobiliser for those who want to safeguard your car from theft. The device stops your car from starting even the case that someone steals or copies your key. This is due to its advanced technology, which is designed to stop the car's engine from starting unless the correct PIN code is entered.
The device connects to the CAN bus network of your vehicle which allows it to communicate with the ECU directly. It makes use of buttons already on the dashboard and steering wheel to create a unique sequence only you can identify and makes it impossible for someone else to start your car. This is the best way to safeguard your pride and joy. It will keep its value intact if you ever want to sell it.
Installing a ghost immobiliser can be an easy process, however, it is important to follow the steps carefully to avoid problems with the electrical system and malfunctions. First, you must locate and identify a constant 12V power source as well as an appropriate grounding point on the chassis of your vehicle. Then, you can begin connecting the wires to the immobiliser. Make use of high-quality connectors and soldering techniques to ensure a secure connection. Connect the connections with heat shrink tubing or insulation tape, as well as other materials to avoid short circuits of electricity.
After the wires have been connected, you can reconnect the battery and then turn on the engine to test the function of the immobiliser. After you've confirmed that everything is working properly, you can install the immobiliser in a safe place inside the vehicle. Be sure to hide it securely so that a thief cannot alter it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified This means it complies with the highest standards of security and is a great protection against car thieves. It is resistant to key cloning and hacking and cannot be disabled without the code. The device is also easy to use and can be put into the service valet mode to ensure that your vehicle is not activated when you take it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser, a cutting modern security system, was designed to stop theft of vehicles. It connects directly to your vehicle's CAN bus network and communicates with the ECU which makes it a virtually undetectable addition to your car. auto ghost immobiliser will not interfere with your vehicle's factory settings unlike other aftermarket systems which require the removal of circuit elements.
It's also undetectable to thieves using diagnostic scanning devices. The system doesn't send or receive radio frequency signals but instead uses CAN data to communication with your ECU. Furthermore, it doesn't require any modification to your vehicle's existing key fobs.
Enter your sequence for disarming (either two or one buttons) and then turn on the ignition of your vehicle to activate Ghost Immobiliser. The indicator will flash two times to confirm that you've entered the correct code. You can now start your vehicle and drive in a safe manner.
Once installed, the Ghost Immobiliser protects your car against hacking or key cloning while also protecting its value. If you ever need to surrender your car for service or valet parking, the Ghost Immobiliser can be temporarily disabled in Transport Mode.
You'll need a constant power source (12V) as well as a grounding source to complete the installation of the Ghost immobiliser. Make sure that both are well-insulated and safe to touch. It is also recommended to use cable ties to bundle and secure the wires, since this will reduce the risk of theft by thieves. Be sure to double-check the position of these points to avoid committing a mistake, and mark them with a piece of tape or label. Check all connections for signs they're wearing out. Make sure all connections are in place and properly insulated. Make sure to test your Ghost Immobiliser after the installation is completed. This will ensure that the unit is functioning properly and that all connections are safe and well-insulated. If you encounter any issues, be sure to address them immediately.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that works seamlessly with your car's ECU in order to prevent unauthorised motor starting. Its innovative technology protects your car against key cloning, hacking, and other common tactics that thieves employ to steal vehicles. The Ghost is a perfect complement to existing tracking and alarm systems to provide the best security for your car. The Ghost's unparalleled features, paired with its discreet design makes it a preferred option for both car enthusiasts and security conscious drivers.
It is essential to follow the procedures for installation to ensure complete integration of the Ghost Immobiliser. The best way to begin is to refer to the wiring diagram of your vehicle that will serve as a roadmap for locating and connecting the wires required. After that, you'll need identify the power source and grounding points. Once you have located them, you will need to mark the points to make them easy to identify during installation. It is also vital to use only the best tools and materials. Basic hand tools can assist to make precise connections while a multimeter can confirm electrical values and guarantee safety. Cable tie and insulation tape will keep all connections neat. A Ghost-specific user's manual is also available.
Before beginning the installation, it's important to test the system by entering the PIN code and starting the vehicle. This test will verify that the immobiliser functions as intended and will stop vehicle starts that are not authorized. This procedure should be carried out frequently as part of your regular inspections of the vehicle to ensure the system is always functioning properly.
After the installation is completed After the installation is completed, you are able to drive your car with confidence. The Ghost will guard your vehicle from would-be car thieves. It will ensure that no one will drive away with your vehicle without having the correct PIN code. The Ghost can also be paired with a Thatcham-approved tracker to detect any attempt to steal or tamper that could lead to the location of your vehicle if it's stolen.
The Ghost can be utilized in a variety of vehicles and is compatible with most major manufacturers. Monty's Locksmith can help you secure your vehicle using this cutting-edge device. Contact us today to learn more about our services and installation options. We are a TASSA Registered installer, a certification that guarantees that we adhere to strict guidelines and procedures for installing our products. This assures customers insurance companies, customers, and law enforcement agencies that installations are carried out safely and properly.